Emm-labs DCC2 DIGITAL CONTROL CENTER Manual de usuario

DCC2 DIGITAL CONTROL

DCC2 User Manual Coax (SPDIF) input This link can operate for sample frequencies up to 96kHz. The DCC2 detects the correct frequency and adjusts auto

DCC2 User Manual TOSLink input Also with this link the DCC2 can be operated in either clock master or clock slave mode. Cable connections: AES/EBU

DCC2 User Manual AES on ST glass input Also with this link the DCC2 can be operated in either clock master or clock slave mode. In master mode an opti

DCC2 User Manual Infrared Remote Control The remote control included with the DCC2 provides many functions for the EMM Labs CDSD transport system as

DCC2 User Manual Specification Output Line Level with 0dBfs signal on AES/EBU inut XLR balanced: +12.55dBu / +10.35dBv / +3.3V RCA unbalanced: +8.

DCC2 User Manual Appendix A: Serial Remote Control (RS-232) The DCC2 is equipped with a 9-pin RS-232 connector for system remote control via a serial

DCC2 User Manual Status info from DCC2 The DCC2 sends back 4 Bytes terminated with a <CR> whenever any status changes. Byte 0 Byte 1 Byte

DCC2 User Manual DCC2 Digital Control Center The DCC2 is a stereo D/A converter with built-in pre-amplifier that evolved from EMM Labs’s acclaimed co

DCC2 User Manual meitnerdesignDCCLabsemmNARROWWIDEINVERTED48 KHZ44.1 KHZLOCK CLOCKCOAX TOS STSTBNCRCAXLRINPUT SELECTAESPCMDSDANLGANALOG OUTPUTCLOCK CO

DCC2 User Manual Function Switches and Indicators Power The main power switch is on the back of the unit. The chrome power button on the front is a m

DCC2 User Manual PCM – AES/EBU: Selects PCM digital input from the XLR inputs. Sample rates up to 96kHz are supported. For sample rates of 88.2kHz a

DCC2 User Manual Basic Operations and Input Connections Memory after powerup and during operation After about 10 seconds after no button has been pus

DCC2 User Manual Clock Master and Clock Slave Modes The DCC2 provides 2 basic ways for how to connect an audio source to it, such as a CD transport: c

DCC2 User Manual Cable connections for AES/EBU input: AES/EBU INPUTS WORD CLOCK I/OIN INOUT OUTDSD INPUTSS/PDIF INPUTSCOAX21TOS ST BNCLRPUSHPUSH

DCC2 User Manual EMM OptiLink This EMM Labs proprietary link is used for the best performance with a EMM Labs transport system. The cables used are st